SGMAV-10ADA61 yaskawa Servo Drive

SGMAV-10ADA61 yaskawa Servo Drive

The main frequency reference can either be a voltage or current signal input. For voltage signals both analog inputs, A1 and
A2, can be used, for current signals A2 must be used.
When using input A2 as a voltage input, set DIP switch S1 to “V” (left position) and program parameter H3-09 to “0” (0 to
+10 Vdc with lower limit) or “1” (0 to +10 Vdc without lower limit).
To use current input at terminal A2, set the DIP switch S1 to "I" (default setting) and set parameter H3-09 = “2” or “3” (4-20
mA or 0-20 mA). Set parameter H3-10 = “0” (frequency reference).

SGMAV-10ADA61 yaskawa Email to: fay@free-plc.com Vicky Wong(Sales)

yaskawa SGMAV-10ADA61

IMDSO14 - DIGITAL SLAVE OUTPUT MODULE    FS450R12KE3/AGDR-71C     DSMB 127
IMDSO04    FS450R12KE3  AGDR-71C    DSDX 452
IMDSI22 - DIGITAL SLAVE INPUT MODULE     FS450R12KE3    DSDP 170
IMDSI02    FS300R17KE3AGDR-76C    DSDP 150
IMDS014    FS300R17KE3AGDR-66C    DSDO131 57160001-KX
IMDER02    FS300R170E4 BGAD-21C    DSDO131
IMCPM02    FS300R12KE3AGDR-62C    DSDO120A
IMCIS12 - CONTROL IO SLAVE    FS300R12KE3AGDR -72C    DSDO115A
IMCIS12     FS300R12KE3/AGDR-62C    DSDO115
IMASO11 - ANALOG SLAVE OUTPUT     FS300R12KE3 AGDR-62C  68569346    DSDO110
IMASO01    FS300R12KE3 AGDR-62C   64717812    DSDO 115A
IMASI23     FS300R12KE3 AGDR-62C   64635867    DSDO 115