General Electric IC660BLD101 Genius IO System Module

General Electric IC660BLD101 Genius IO System Module

The power input terminal board provides two terminals for connecting 48 VDC power and an additional terminal for system and noise ground. Power input connections should be made with copper AWG #16 (1.33 mm 2 ) through AWG #12 (3.31 mm 2 ) wire rated for 75?C (167?F).
Each terminal can accept solid or stranded wires, but the wires into any given terminal should be the same type and size. It is recommended that the GND terminal on the power supply be connected to the GND terminal on the rack and to earth using copper AWG #12 (3.3 mm 2 ) wire rated for 75?C (167?F) and a ring terminal to ensure adequate grounding. Use of a nut and star washer for each wire on the GND lug is recommended.

mailto:henry@free-plc.com

General Electric IC660BLD101 and more products for your choice:

1C31233G04  330103-00-03-05-02-00 IS200SRLYH2AAA 3500/15-0-03-02 DI811 3BSE008552R1 
1C31234G01  330103-00-03-05-02-05 IS200SRLYH2A 3500/15-04-04-00 DI811
1C31238H01 330103-00-03-05-02-CN IS200NATCH1CPR3 3500/15-A04-B00-C00 DI810 
1FK7060-5AF71-1ZZ9-Z 330103-00-03-10-01-00 IS200JPDHG1AAA 3500/15-A04-B04-C02 DI810
1FK7060-5AH71-1FH5-Z J09 330103-00-04-10-02-00 IS200EPSMG1A 3500/20  125744-02 DI801
330851-02-000-080-10-01-00